SBM-L G1S2
The grinding and deburring machines are suitable for machining workpieces made of stainless steel, steel, aluminum or non-ferrous metal on both sides.
The SBM-L G1S2 grinding and deburring machines were developed for deburring on both sides and edge rounding of workpieces in one operation. The LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts and stamped parts. The L series is equipped with three units each on the top and bottom. The processing of stainless steel, steel, aluminum or non-ferrous metal workpieces can be done either on the upper side, the lower side or on both sides.
Two-sided sheet metal processing and edge rounding in one operation gives time savings of up to 60%. It is also possible to easily connect automation solutions or to integrate them into production lines. The machine concept ensures ergonomic operation and a pleasant working environment without pollution, dust and noise.
Technical data
SBM-L G1S2
working width max.
1000 / 1500 / 2000 mm
workable material thickness
0.5 - 50 mm
load
300 kg/rm
voltage
400 V / 50 Hz
network structure
3~ PEN / 3~ PE+N
total current consumption
43.7 A / 43.7 A / 43,7 A
total power
19.2 kW / 19.2 kW / 19.2 kW
insulation class
IP 42
infinitely variable feed speed
0-4 m/min.
adjustment of material thickness
electric
adjustment of tools
electric
weight approx.
2500 / 2800 /3200 kg
dimensions (W/D/H ) approx.
2800/1500/1800 mm
3300/1500/1800 mm
3300/1500/1800 mm
SBM-L G1S2 USA
working width max.
1000 / 1500 mm / 2000 mm
workable material thickness
0.5-50 mm (0.02-1.97 inch)
load
300 kg/rm
voltage
480 V / 60 Hz
network structure
3~ PEN / 3~ PE+N
total current consumption
43.8 A / 40.8 A / 40.8 A
total power
20.4 kW / 20.4 kW / 20.4 kW
insulation class
IP 42
infinitely variable feed speed
0-4 m/min. (0-13 ft/min)
adjustment of material thickness
electric
adjustment of tools
electric
weight approx.
2500 / 2800 kg
(5512 / 6173 lbs)
(5512 / 6173 lbs)
dimensions (W/D/H ) approx.
2800/1500/1800 mm
(110/59/71 inch)
3300/1500/1800 mm)
(130/59/71 inch)
(110/59/71 inch)
3300/1500/1800 mm)
(130/59/71 inch)
Further information
- Deburring and edge rounding of parts up to 50 mm material thickness
- Removal of spots on the sheet metal surface
- Processing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second time
- Simultaneous deburring and edge rounding of interior and exterior contours
- Dry operation
- Simple, intuitive operation
- The processing units can be individually adjusted or turned on and off electrically.
- Maximum productivity while maintaining machining quality
- The cross-machining principle guarantees optimum tool utilisation over the entire working width.
- Faster and simpler tool change within just a few minutes
- Modular and compact in modern machine design - smaller footprint
- Improved work environment - Reduction of dust, dirt and noise
- Optionally available: Conveyor Technology; Handling Systems, Automation; Custom Solutions
- Up to 60 % work time savings compared to one-side processing grinding machines
Downloads
General product information
METAL PROCESSING - Adhesión de pintura (ES)PDF / 0,4 MBMETAL PROCESSING - Gamme de produit (FR)PDF / 4,2 MBMETAL PROCESSING - KUHLMEYER Overview (EN)PDF / 1,5 MBMETAL PROCESSING - KUHLMEYER Überblick (DE)PDF / 1,4 MBMETAL PROCESSING - Lackhaftung (DE)PDF / 0,4 MBMETAL PROCESSING - Overview (CN)PDF / 1,7 MBMETAL PROCESSING - Overview (EN)PDF / 1,6 MBMETAL PROCESSING - Overview (ES)PDF / 1,6 MBMETAL PROCESSING - Overview (FR)PDF / 1,6 MBMETAL PROCESSING - Overview (IT)PDF / 1,6 MBMETAL PROCESSING - Overview (PL)PDF / 1,6 MBMETAL PROCESSING - Overview (RU)PDF / 1,6 MBMETAL PROCESSING - Overzichtfoldern (NL)PDF / 1,6 MBMETAL PROCESSING - Product range (EN)PDF / 4,2 MBMETAL PROCESSING - Produktspektrum (DE)PDF / 4,2 MBMETAL PROCESSING - Tenue de Peinture (FR)PDF / 0,4 MBMETAL PROCESSING - Verfhechting (NL)PDF / 0,4 MBMETAL PROCESSING - Übersicht (DE)PDF / 1,6 MBData sheets
METAL PROCESSING - SBM-L G1S2 (DE)PDF / 0,2 MBMETAL PROCESSING - SBM-L G1S2 (EN)PDF / 0,2 MBMETAL PROCESSING - SBM-L G1S2 (FR)PDF / 0,2 MBMETAL PROCESSING - SBM-L G1S2 (NL)PDF / 0,2 MBInstruction manuals / Lists of spare parts
SBM L 2000 (EN) / Manual, BedienungsanleitungPDF / 16,2 MBSBM- L G1S2 (DE, EN, FR, IT) / Spare part list, ErsatzteillistePDF / 11,8 MBSBM-L G1S2 (EN) / Manual, BedienungsanleitungPDF / 9,9 MBSBM-L G1S2 ALU MIX (DE, EN, FR, IT) / Spare part list, ErsatzteillistePDF / 14,1 MBSBM-L G1S2 ALU MIX (EN) / Manual, BedienungsanleitungPDF / 5,9 MB
Examples
