SBM-XS G1E1

Highly effective deburring on both sides and even edge rounding for punched, laser and fine plasma cut workpieces in just one operation.


The SBM-XS G1E1 grinding machine fro is used for effective sheet metal processing. It was designed to process small parts as well as for processing on both sides and for a directionless finish in the field of metal processing. With this machine, LISSMAC is setting new standards with its focus on deburring and, in particular, deburring small parts. The machine also achieves significant time savings through machining on both sides simultaneously.

The deburring machine is suitable for deburring laser parts and rounding edges. Inner and outer contours can be machined in just one operation. When deburring, a cross-sanding belt works on the surface of the material. Burrs and surface splashes that can occur during punching or laser cutting are completely removed. All workpiece edges, on the outside and inside contours, are rounded evenly by two rotating, flexible grinding flap rollers. Secondary burrs are also effectively removed, while galvanized surfaces or protective films are not destroyed.

SBM XS G1E1 Blech bearbeiten Kanten verrunden Entgratmaschine Schleifmaschine Kleinteile bearbeiten
SBM XS G1E1 Blech bearbeiten Kanten verrunden Entgratmaschine Schleifmaschine Kleinteile bearbeiten Rückseite
SBM XS G1E1 Blech bearbeiten Kanten verrunden Entgratmaschine Kleinteile bearbeiten Wendestation
SBM XS G1E1 Blech bearbeiten Kanten verrunden Entgratmaschine Schleifmaschine Kleinteile bearbeiten Ablage
SBM XS G1E1 Blech bearbeiten Kanten verrunden Entgratmaschine Schleifmaschine Kleinteile bearbeiten innen 1
SBM XS G1E1 Blech bearbeiten Kanten verrunden Entgratmaschine Schleifmaschine Kleinteile bearbeiten Bedienpanel
Technical data
SBM-XS 300 G1E1
Working width
300 mm (12 inch)
Workable material thickness
1 - 15 mm (0.04-0.59 inch)
Voltage
400 V, 50 Hz / 480 V, 60 Hz
Network structure
3~ PEN / 3~ PE+N
Total current consumption
13.5 A / 14 A
Total power
7.5 kW / 8.5 kW
Insulation class
IP 42
Feed speed
0 - 2 m/min. (0-6.6 ft/min)
Setting part thickness
electric
Setting Tools
electric
Weight
approx. 1400 kg (3086 lbs)
Dimensions (W/L/H)
approx. 1300/2300/1900 mm
(51/91/75 inch)
SBM-XS 300 G1E1 ALU MIX
Working width
300 mm (12 Inch)
Workable material thickness
1 - 15 mm (0.04-0.59 Inch)
Workable materials
steel/stainless steel/aluminiuim
Voltage
400 V, 50 Hz / 480 V, 60 Hz
Network structure
3~ PEN / 3~ PE+N
Total current consumption
24 A / 23 A
Total power
14 kW / 15.2 kW
Insulation class
IP 42
Feed speed
0 - 2 m/min. (0-6.6 ft/min).
Setting part thickness
electric
Setting Tools
electric
Weight
approx. 1450 kg (3197 lbs)
Dimensions (W/L/H)
approx. 1300/2300/1900 mm
(51/91/75 inch)
Further information
With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)
With vacuum table for part dimensions of 45 x 45 x 1 mm up
to maximum 200 x 200 x15 mm (geometry-dependent)
  • Time consuming turn-over of parts with a second pass is
    not necessary
  • Swinging away of the innovative turning station makes it
    possible to deburr parts longer than 200 mm
  • A higher level of automation ensures an economic and
    reliable deburring process, also for large quantities of
    parts
  • A high and sustainable deburring quality.
  • Dry deburring process (no chemical additives as used in
    tumblers)
  • Small parts are returned to the front of the machine and
    gathered in a box. No extra walking back and forth for
    the operator.
  • Energy-efficient
  • The deburring process ensures an even wear of the belt
    and brushes across the entire width of the machine
  • Fast and simple tool Change
  • Simple and intuitive operation of the machine
  • Modern, compact machine design
Downloads

Warning: Undefined array key "name_10" in /var/www/clients/client1/web1/web/www.lissmac.com/tpl/products.php on line 243
METAL PROCESSING - Adhesión de pintura (ES)PDF / 0,4 MBMETAL PROCESSING - Gamme de produit (FR)PDF / 4,2 MBMETAL PROCESSING - Lackhaftung (DE)PDF / 0,4 MBMETAL PROCESSING - Lackhaftung (KOR)PDF / 0,5 MBMETAL PROCESSING - Overview (CN)PDF / 1,7 MBMETAL PROCESSING - Overview (EN)PDF / 1,6 MBMETAL PROCESSING - Overview (ES)PDF / 1,6 MBMETAL PROCESSING - Overview (FR)PDF / 1,6 MBMETAL PROCESSING - Overview (IT)PDF / 1,6 MBMETAL PROCESSING - Overview (NL)PDF / 1,6 MBMETAL PROCESSING - Overview (PL)PDF / 1,6 MBMETAL PROCESSING - Overview (RU)PDF / 1,6 MBMETAL PROCESSING - Product range (EN)PDF / 4,2 MBMETAL PROCESSING - Produktspektrum (DE)PDF / 4,2 MBMETAL PROCESSING - Tenue de Peinture (FR)PDF / 0,4 MBMETAL PROCESSING - Verfhechting (NL)PDF / 0,4 MBMETAL PROCESSING - Übersicht (DE)PDF / 1,6 MB
Warning: Undefined array key "name_10" in /var/www/clients/client1/web1/web/www.lissmac.com/tpl/products.php on line 252
METAL PROCESSING - SBM-XS G1E1 (DE)PDF / 0,2 MBMETAL PROCESSING - SBM-XS G1E1 (EN)PDF / 0,2 MBMETAL PROCESSING - SBM-XS G1E1 (FR)PDF / 0,2 MB
Warning: Undefined array key "name_10" in /var/www/clients/client1/web1/web/www.lissmac.com/tpl/products.php on line 252
SBM-XS 300 G1E1 (DE, EN, FR, IT) / Spare part list, ErsatzteillistePDF / 6,5 MBSBM-XS 300 G1E1 (EN) / Manual, BedienungsanleitungPDF / 1,3 MBSBM-XS 300 G1E1 ALU MIX (DE, EN, FR, IT) / Spare part list, ErsatzteillistePDF / 7 MBSBM-XS 300 G1E1 ALU MIX (EN) / Manual, BedienungsanleitungPDF / 1,4 MB

Examples

SBM-XS-blech-alu-kleinteilebearbeitung-entgraten-kantenverrunden

SBM-XS G1E1 in action

These products could also be of interest