SBM-XL G2S2
The main requirement for deburring and rounding off of thick sheet metal on both sides is the processing of plasma and flame-cut parts after oxy-fuel or plasma cutting.
The grinding and deburring machines SBM-XL G2S2 from LISSMAC were developed for efficient deburring and edge rounding of thick metal sheets on both sides. The main focus is on deburring and processing plasma and flame-cut parts after oxy-fuel and plasma cutting. The XL series is equipped with four units on the top and bottom. The edge rounding on both sides and the deburring of steel and stainless steel parts results in highly efficent processes. By machining both sides simultaneously, it saves turning over heavy parts.
The SBM-XL G2S2 has high-performance grinding units that achieves an accurate finish and has a high load capacity for heavy components. Additional flexibility and energy efficiency are achieved through processing units that can be switched on and off separately.
Technical data
SBM-XL G2S2
working width max.
1500 mm
workable material thickness
0,5 - 120 mm
load
300 kg/rm
voltage
400 V / 50 Hz
network structure
3~ PEN / 3~ PE+N
total current consumption
102,7 A
total power
49,8 kW
insulation class
IP 42
infinitely variable feed speed
0 - 4 m/min.
adjustment of material thickness
electric
adjustment of tools
electric
weight approx.
4200 kg
dimensions (W/D/H ) approx.
3600/2100/2000 mm
SBM-XL G2S2 USA
working width max.
50-1500 mm (2-40 / 2-60 inch)
workable material thickness
0,5 - 120 mm (0,02-4.72 inch)
load
300 kg/rm (661 lbs)
voltage
480 V / 60 Hz
network structure
3~ PEN / 3~ PE+N
total current consumption
89,5 A
total power
49,6 kW
insulation class
IP 42
infinitely variable feed speed
0-4 m/min. (0-13 ft/min)
adjustment of material thickness
electric
adjustment of tools
electric
weight approx.
4200 kg
( 9259 lbs)
( 9259 lbs)
dimensions (W/D/H ) approx.
3600/2100/2000 mm
(142/83/80 inch)
(142/83/80 inch)
Further information
- Deburring and edge rounding of parts up to 120 mm material thickness
- Processing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second time
- Simultaneous deburring and edge rounding on interior and exterior contours
- Dry operation
- Simple, intuitive operation
- The processing units can be individually adjusted or turned on and off electrically.
- Maximum productivity while maintaining machining quality
- The cross-machining principle guarantees optimum tool utilisation over the entire working width.
- Faster and simpler tool change within just a few minutes
- Modular and compact in modern machine design - smaller footprint
- Improved work environment - Reduction of dust, dirt and noise
- Optionally available: Conveyor Technology; Handling Systems, Automation; Custom Solutions
- For repeated customer requirements, processing parameters can be called up quickly and easily through predefined programs.
- Up to 60 % work time savings compared to one-side processing grinding machines
Downloads
General product information
METAL PROCESSING - Katalog (DE)PDF / 5,1 MBMETAL PROCESSING - Katalog / Catalogo (IT)PDF / 5,1 MBMETAL PROCESSING - Katalog / Catalogue (EN)PDF / 5,1 MBMETAL PROCESSING - Katalog / Catalogue (FR)PDF / 5,1 MBMETAL PROCESSING - Katalog / Catalogus (NL)PDF / 5,1 MBMETAL PROCESSING - Katalog / Catálogo (ES)PDF / 5,1 MBMETAL PROCESSING - Lackhaftung (DE)PDF / 0,5 MBMETAL PROCESSING - Lackhaftung / Hechting van een coating (NL)PDF / 0,5 MBMETAL PROCESSING - Lackhaftung / Paint adhesion (EN)..PDF / 0,5 MBMETAL PROCESSING - Lackhaftung / Tenue de Peinture (FR)PDF / 0,5 MBMETAL PROCESSING - Übersicht (DE)PDF / 1,7 MBMETAL PROCESSING - Übersicht / Overview (CZ)PDF / 1,7 MBMETAL PROCESSING - Übersicht / Overview (EN)PDF / 1,7 MBMETAL PROCESSING - Übersicht / Overview (ES)PDF / 1,7 MBMETAL PROCESSING - Übersicht / Overview (FR)PDF / 1,7 MBMETAL PROCESSING - Übersicht / Overview (IT)PDF / 1,7 MBMETAL PROCESSING - Übersicht / Overview (PL)PDF / 1,7 MBMETAL PROCESSING - Übersicht / Overzichtfoldern (NL)PDF / 1,8 MBData sheets
METAL PROCESSING - SBM-XL G2S2 (DE)PDF / 0,3 MBMETAL PROCESSING - SBM-XL G2S2 (EN)PDF / 0,2 MBMETAL PROCESSING - SBM-XL G2S2 (ES)PDF / 0,3 MBMETAL PROCESSING - SBM-XL G2S2 (FR)PDF / 0,3 MBMETAL PROCESSING - SBM-XL G2S2 (IT)PDF / 0,2 MBMETAL PROCESSING - SBM-XL G2S2 (NL)PDF / 0,2 MBInstruction manuals / Lists of spare parts
SBM-XL G2S2 (EN) / Manual, BedienungsanleitungPDF / 2,2 MB
Examples
