The compact "power package" from LISSMAC proves that floor saws do not have to be large and unwieldy: the FS 20 is not only extremely powerful and equipped with convincing technology.
Description
- Particularly compact construction
- The hand cranked travel enables a uniform cutting rate, guaranteeing a straight saw cut, thereby extending the life of the saw blade – lower cutting costs.
- The FS 20 is also available with electric power travel, ideally suited to heavy cutting in concrete or asphalt.
- For longer service life – the vertically positioned engine guarantees permanent oil supply in every cutting situation
- Lowering and raising the saw blade is done smoothly, therefore preventing damage to the saw blade
- Clear and ergonomic arrangement of the instruments
- Blade guard front can be raised for intersections
- The rear wheel sits outside of the saw cut - this makes recutting of cut joints easy.
- The LISSMAC swivel arm principle saves time and Money - long times for converting from left to right cut are eliminated by the 180 degree swivel saw arm
- Large water and fuel tanks reduce down-time to a minimum.
- Parking brake, water saving flange spraying and saw cutting depth indicator are standard equipment.
Technical data
FS 20 D (-VE)
| cutting depth standard / optional |
220 mm / 270 mm |
| cutting depth setting |
stepless threaded spindle with depth gauge |
| saw blade diameter standard / optional |
600 mm / 700 mm |
| saw blade holder |
25.4 mm |
| drive motor |
HATZ Diesel |
| output power max. |
10.1 kW / 13.7 hp |
| emission level |
stage 5 |
| feed standard |
hand crank |
| feed FS 20-VE |
electric/hand crank |
| saw blade speed |
1920 1/min |
| left/right cut |
yes |
| dimensions (L/W/H) |
1100/750/1100 mm |
| weight |
263 kg |
| weight VE |
268 kg |
FS 20 D USA
| cutting depth |
8.66 inch |
| cutting depth setting |
stepless threaded spindle with depth gauge |
| saw blade diameter max. |
23.62 inch |
| saw blade holder |
1.00 inch |
| drive motor |
HATZ Diesel |
| output power max. |
10.1 kW / 13.7 hp |
| feed standard |
hand crank |
| feed FS 20-VE |
electric/hand crank |
| saw blade speed |
1920 1/min |
| left/right cut |
yes |
| dimensions (L/W/H) |
43.31/29.53/43.31 inch |
| weight |
579.82 lbs |
| weight VE |
590.84 lbs |
Downloads
