VW 500

titel-vacuum-wet-500.jpg
The VACUUM WET waste water suctions remove the cutting slurry quickly and simply from the joint during sawing. The saw blade does not then need to remove any additional material. This means the machine works more efficiently and the saw blade life time is increased. And the extraction has a positive effect and also cools the saw blade.

Description

  • Faster and easier attachement to the floor saw UNICUT 500 and UNICUT 800 with only two plug bolts
  • All parts can be quickly removed for cleaning
  • Simple emptying of the wet container using eccentric lever
  • Wet container with fine hole Ø 5 mm sieve easy and quick to clean
  • Hole sieve made completely of stainless steel (service life)
  • Compact design with high ground clearance
  • Closed system that is directly installed on the floor saw and driven by a hydraulic interface to the machine

 

Sustainability

  • Conservation of resources by minimal water consumption, as well as use of environmentally friendly drive technology, collectors and recovery of the cutting/cooling water slurry, waste water cleaning and material reclamation, as well as recycling of cutting/cooling water. In order to ensure this type of ecologically and economically sustainable system, the use of the following wet and dry extraction developed by LISSMAC is indispensable.

 

Technical data

VACUUM-WET 500

container for coarse parts 25 l
sieve for coarse parts Ø 5 mm
required hydraulic supply Q=40 l/min;140 bar
air delivery rate 2200 m³/h
water delivery rate 2450 l/h
power consumption 9 kW
fresh water connection GEKA-coupling, min. ¾“, length max. 40 m
waste water connection GEKA-coupling, min. 1“, length max. 40 m
exhaust hose connection Ø 100 mm, length max. 10 m
dimensions (L/W/H) 600/900/1300 mm
total weight 250 kg

VACUUM-WET 500 USA

container for coarse parts 6.60 gal
sieve for coarse parts Ø 0.20 inch
required hydraulic supply Q=1250 gal/min;2030.53 psi
air delivery rate 44143.33 ft³/h
water delivery rate 274.96 gal/h
power consumption 9 kW
fresh water connection GEKA-coupling, min. ¾“, length max. 131.23 ft
waste water connection GEKA-coupling, min. 1“, length max. 131.23 ft
exhaust hose connection Ø 3.94 inch, length max. 32.81 ft
dimensions (L/W/H) 23.62/35.43.51.18
total weight 39.37 lbs

Downloads

Overview Suction Units

  • These products could also be of interest