VD 500

titel-vaccum-dry-500.jpg
vaccum-dry-500---angebaut.jpg
titel-vaccum-dry-500.jpg
vaccum-dry-500---angebaut.jpg
UNICUT 300 mit VACUUM-DRY 500 EN
The VACUUM DRY waste water suctions remove the cutting dust and particles quickly and simply from the joint during sawing. The saw blade does not then need to remove any additional material. This means the machine works more efficiently. And the extraction has a positive effect and also cools the saw blade.

Description

VACUUM-DRY 500
  • Fast and simple extension to the UNICUT 500 floor saw: Closed system, which is directly installed on the floor saw and driven by a hydraulic interface to the machine.
  • Can be quickly and simply retrofit or converted with corresponding accessories such as a special saw blade protective hood and flange cooling for dry cutting.
  • Simple emptying of the sawdust and particles by swivelling out and replacement of the filter bags
  • The exhaust system automatically cleans the filters during extraction
  • Clean, dry joint can be immediately further processed (poured)

Technical data

VACUUM-DRY 500

saw blade Ø 500 mm
container for dust/particle 25 l synthetic sack
required hydraulic supply Q = 40 l/min; 140 bar
air delivery rate 1100 m³/h
exhaust hose connection Ø 100 mm, length max. 3,5 m
dimensions (L/W/H) 1050/930/2070 mm
total weight 320 kg

VACUUM-DRY 500 USA

saw blade Ø 19.69 inch
container for dust/particle 5.50 gal synthetic sack
required hydraulic supply Q = 125 gal/min; 2030.53 psi
air delivery rate 882.87 ft³/h
exhaust hose connection Ø 9.94 inch, length max. 3.28 ft
dimensions (L/W/H) 41.34/36.61/81.50 inch
total weight 705.78 lbs

Downloads

Overview Suction Units

  • These products could also be of interest