FS 20 D

titel-fs-20-d.jpg
fs-20-d-motorseite.jpg
fs-20-d-haubehochgeklappt-frei.jpg
fs-20-b-ve-rueckseite.jpg
titel-fs-20-d.jpg
fs-20-d-motorseite.jpg
fs-20-d-haubehochgeklappt-frei.jpg
fs-20-b-ve-rueckseite.jpg
Floor Saw FS 20
The compact "power package" from LISSMAC proves that floor saws do not have to be large and unwieldy: the FS 20 is not only extremely powerful and equipped with convincing technology.

Description

  • Particularly compact construction
  • The hand cranked travel enables a uniform cutting rate, guaranteeing a straight saw cut, thereby extending the life of the saw blade – lower cutting costs.
  • The FS 20 is also available with electric power travel, ideally suited to heavy cutting in concrete or asphalt.
  • For longer service life – the vertically positioned engine guarantees permanent oil supply in every cutting situation
  • Lowering and raising the saw blade is done smoothly, therefore preventing damage to the saw blade
  • Clear and ergonomic arrangement of the instruments
  • Saw hood front can be raised for intersections
  • The rear running wheel sits outside of the saw cut. This makes recutting of cut joints easy.
  • The LISSMAC swivel arm principle saves time and money. Long times for converting from left to right cut are eliminated by the 180 degree swivel saw arm  
  • Large water and fuel tanks reduce down-time to a minimum.
  • Parking brake, water saving flange spraying and saw cutting depth indicator are standard equipment.

Technical data

FS 20 D

cutting depth 220 mm
cutting depth setting stepless threaded spindle with depth gauge
saw blade diameter max. 600 mm
saw blade holder 25.4 mm
drive motor HATZ Diesel
output power max. 10.1 kW / 13.8 hp
saw blade speed 1920 1/min
dimensions (L/W/H) 1100/750/1100 mm
weight 263 kg
weight VE 268 kg
left/right cut yes
feed standard hand crank
feed FS 20-VE electric/hand crank

FS 20 D USA

cutting depth 8.66 inch
cutting depth setting stepless threaded spindle with depth gauge
saw blade diameter max. 23.62 inch
saw blade holder 1.00 inch
drive motor HATZ Diesel
output power max. 10.1 kW / 13.7 hp
saw blade speed 1920 1/min
dimensions (L/W/H) 43.31/29.53/43.31 inch
weight 579.82 lbs
weight VE 590.84 lbs
left/right cut yes
feed standard hand crank
feed FS 20-VE electric/hand crank

Downloads

Overview Floor saws

  • These products could also be of interest