FS 20 B

titel-fs-20-d.jpg
fs-20-d-motorseite.jpg
fs-20-d-haubehochgeklappt-frei.jpg
fs-20-b-ve-rueckseite.jpg
titel-fs-20-d.jpg
fs-20-d-motorseite.jpg
fs-20-d-haubehochgeklappt-frei.jpg
fs-20-b-ve-rueckseite.jpg
Floor Saw FS 20
The compact "power package" from LISSMAC proves that floor saws do not have to be large and unwieldy: the FS 20 is not only extremely powerful and equipped with convincing technology.

Description

  • Particularly compact construction
  • The hand cranked travel enables a uniform cutting rate, guaranteeing a straight saw cut, thereby extending the life of the saw blade – lower cutting costs.
  • The FS 20 is also available with electric power travel, ideally suited to heavy cutting in concrete or asphalt.
  • For longer service life – the vertically positioned engine guarantees permanent oil supply in every cutting situation
  • Lowering and raising the saw blade is done smoothly, therefore preventing damage to the saw blade
  • Clear and ergonomic arrangement of the instruments
  • Saw hood front can be raised for intersections
  • The rear running wheel sits outside of the saw cut. This makes recutting of cut joints easy.
  • The LISSMAC swivel arm principle saves time and money. Long times for converting from left to right cut are eliminated by the 180 degree swivel saw arm  
  • Large water and fuel tanks reduce down-time to a minimum.
  • Parking brake, water saving flange spraying and saw cutting depth indicator are standard equipment.

Technical data

FS 20 B

cutting depth 220 mm
cutting depth setting stepless threaded spindle with depth gauge
saw blade diameter max. 600 mm
saw blade holder 25.4 mm
drive motor HONDA petrol V2-cylinder
output power max. 15.5 kW / 20.8 hp
saw blade speed 1920 1/min
dimensions (L/W/H) 1100/750/1100 mm
weight 205 kg
weight VE 210 kg
left/right cut yes
feed standard hand crank
feed FS 20-VE electric/hand crank

FS 20 B USA

cutting depth 8.66 inch
cutting depth setting stepless threaded spindle with depth gauge
saw blade diameter max. 23.62 inch
saw blade holder 1.00 inch
drive motor HONDA petrol V2-cylinder
output power max. 15.5 kW / 20.8 hp
saw blade speed 1920 1/min
dimensions (L/W/H) 43.31/29.53/43.31 inch
weight 451.95 lbs
weight VE 462.97 lbs
left/right cut yes
feed standard hand crank
feed FS 20-VE electric/hand crank

Downloads

Overview Floor saws

  • These products could also be of interest