Pipe drilling machine

Kanalkernbohrgerät
Kanalkernbohrgerät
Kanalkernbohrgerät
Kanalkernbohrgerät
Kanalkernbohrgerät mit Kanalrohr
Kanalkernbohrgerät mit Kanalrohr
Kanalkernbohrgerät mit Kanalrohr
Kanalkernbohrgerät mit Kanalrohr
Kanalkernbohrgerät Anwendungsbild
Kanalkernbohrgerät Anwendungsbild
Kanalkernbohrgerät Anwendungsbild
Kanalkernbohrgerät Anwendungsbild
Kanalkernbohrgerät Anwendungsbild
Kanalkernbohrgerät Anwendungsbild
Kanalkernbohrgerät
Kanalkernbohrgerät
Kanalkernbohrgerät mit Kanalrohr
Kanalkernbohrgerät mit Kanalrohr
Kanalkernbohrgerät Anwendungsbild
Kanalkernbohrgerät Anwendungsbild
Kanalkernbohrgerät Anwendungsbild
Versatile diamond core drilling stand and diamond core drilling machine for pipe drilling up to 350 mm

Description

CORE DRILLING MACHINE - CDM 23 WP
  • User friendly – three gear levels provide optimal rotational speed at each respective core drilling diameter
  • Rapid drill bit mounting with integrated spindle guard
  • Emergency stop button is centrally located, right on the control display, and can be operated quickly and easily, even in the toughest situations
  • To avoid risk of burns, the exhaust hose is equipped with additional protective heat insulation in the working area
  • Maximum safety due to integrated centrifugal clutch (2-stroke gasoline motor) and mechanical overload clutch (3-gear transmission)

CHANNEL CORE DRILLING STAND - CDR 350
  • Simple mounting of core drilling stand to exposed sewer pipe by tensioning set or ratchet
  • If the sewer pipe is not completely exposed, the core drilling stand can be mounted easily and efficiently directly to the ground, using spikes
  • Ergonomic and effortless core drilling by a hand crank cross which can be operated vertically or horizontally
  • The support feed is precisely controlled by a 1:1 direct ratio as well as a trapezoid spindle
  • Precise support feed by galvanized steel posts and Teflon bushings
  • Innovative drilling stand support bracket offers excellent stability and precise drilling at any angle between 45 and 90 degrees
  • Adjustments for angle drilling can be made with the included No. 19 and ring-ratchet wrench
  • Drilling stand support bracket can be mounted on right or left side, to accommodate the space requirements at any construction site setting
  • Drilling stand support bracket also features a crane hook which facilitates lifting and lowering of the entire drilling system in and out of the construction pit

Technical data

CDM 23 WP

rated power 2,7 hp / 2000 W
output power 2.4 hp / 1750 W
speed without load 370/720/1090 1/min
speed fully loaded 220/420/650 1/min
max. core drill-Ø, stationary 350/160/100 mm
cooling air cooled
core bit connection 1 1/4" UNC
drill mor holder UNIVERSAL mounting plate
dimensions with clip (L/W/H) 350/700/280 mm
weight 16 kg

CDR 350

core bits-Ø recommended 80 - 300 mm
core bits-Ø max. 350 mm
adjustable useful length 250 mm
motor mounting using UNIVERSAL
feed gears 1:1
feed hand crank wheel
angle drilling 90° - 45°
drill stand foot steel
fastening clamping-fixture/peg
dimensions (L/W/H) 500/600/950 mm
weight 39 kg

CDM 23 WP USA

rated power 2,7 hp / 2000 W
output power 2.4 hp / 1750 W
speed without load 370/720/1090 1/min
speed fully loaded 220/420/650 1/min
max. core drill-Ø, stationary 13.78/6.30/3.94 inch
cooling air cooling
core bit connection 1 1/4" UNC
drill mor holder UNIVERSAL mounting plate
dimensions with clip (L/W/H) 27.36/13.35/11.41 inch
weight 35.27 lbs

CDR 350 USA

core bits-Ø recommended 3.15-13.78 inch
core bits-Ø max. 13.78 inch
adjustable useful length 9.84 inch
motor mounting using UNIVERSAL
feed gears 1:1
feed hand crank wheel
angle drilling 90° - 45°
drill stand foot steel
fastening clamping-fixture/peg
dimensions (L/W/H) 27.17/16.69/32.95 inch
weight 68.34 lbs

Downloads

Overview Core Drilling

  • These products could also be of interest