THE RIGHT SAW FOR FIREPROOF APPLICATIONS AND MATERIALS   MBS 502 with Dust Extraction
The cellular concrete band saw with fine dust extraction has significantly lower values than the maximum allowable concentration (3 mg/m³) recently once again lowered by the government
The LISSMAC cellular concrete band saw is specifically designed for the processing of fireproof materials and porous concrete.
The sophisticated technology of LISSMAC cellular concrete band saws is the result of many years of practice-oriented research and development.
- Optimally dimensioned saw conveyors
The proper ratio between saw roller diameter, saw belt thickness and saw belt speed is one of the decisive factors for the service life of the saw belt.
- Direct drive of the saw belt traction wheels
V-belts or other drive elements do not have to be serviced or maintained because the lower saw belt traction wheel is operated directly by a geared motor.
- Sawing debris does not clutter or jam the lower saw roller box
The lower saw roller box has a large opening through which the sawing debris can slip easily.
- Automatic saw belt tensioning
This ensures that the saw belt is properly and optimally tightened at all times. The saw belt is neither too tight nor too loose. This reduces cracks or other surface changes of the saw belt material and thus significantly reduces the risk of breakage. The exact tensioning of the saw belt yields optimal cutting accuracy.
It takes only one hand to open the saw table and the saw belt is consequently quickly replaced.
No unnecessary saw belt stress because the saw belt only runs when sawing.
All saws of the MBS series feature an easy-to-use swivel saw table that uses very little space during transport or storage.
LISSMAC cellular concrete band saws are easily moved or transported by forklift, crane and simply pushing with two transport wheels.
- Significantly lower values than the maximum concentration allowable by German law (3 mg/m³). This limit was lowered in 2002 following an EU directive.
- Fine dust concentration (A category dust) reduced to approx. 1/100th of that produced by conventional band saws
- Short amortisation period due to savings related to personnel protection measures and equipment such as dust masks and filters, for example
- Significantly less soiling of workstations in close proximity and reduced dust hazards for employees
- Optimally coordinated components guarantee the highest level of suction performance
|
| Technical data MBS 502 with Dust Extraction: |
|---|
| Cutting height | 400 mm | | Cutting length | 700 mm | | Motor capacity | 0.75 kW / 400 V DS, 0.75 kW / 230 V WS | | Current consumption | 2.1 A / 10.2 A | | Total weight | 165 kg | | Saw table width | 710 mm | | Saw table length | 960 mm | | Saw roller diameter | 500 mm | | Gap beam/saw belt | 490 mm | | 750 mm |
| | Width | 1,000 mm | | Height | 1,700 mm | | Suction flange | 80 mm | | Rated motor power | 2.2 kW, 1 Ph/230 V, 50 Hz / 2.2 kW, 3 Ph/400 V, 50 Hz | | Rated volumetric current | 434 m³/h | | Mind. volumetric current | 362 m³/h | | Interface sub-pressure | 3.370 Pa | | Filter area | 9.00 m² | | Filter cleaning | Manual with hand crank | | Filter material (BIA certified) | Category U, S, G, C | | Total debris collection volume | Approx. 185 l | | Weight | Approx. 122 kg | | Article No. - 230 V | 803025 | | Article No. - 400 V | 803026 | | Subject to technical change without notice |
|
|
[ Product series Cellular Concrete Band Saws ]
 MBS 502-2
The MBS 502-2 (230 volt version) is the bestselling cellular concrete band saw for porous concrete in the world.
MBS 502-3
The different designs of the MBS series such as the 400 volt model (MBS 502-3) mean that users require the minimum degree of effort and allow absolutely precise cuts when processing porous concrete.
MBS 502 with Dust Extraction
The cellular concrete band saw with fine dust extraction has significantly lower values than the maximum allowable concentration (3 mg/m³) recently once again lowered by the government
|
