HOME >> Special Purpose Machines / Plant Construction >> Special-purpose machinery reference projects Tuesday, January 6, 2009
LISSMAC PLANT CONSTRUCTION IN PRACTICE
Proven individual system solutions

Chimney Demolition Saw


The deconstruction of the BASF chimney with a height of 200 metres initiated development work on the chimney demolition saw by the MB Schornstein- und Betonabbruch company and LISSMAC. This development work was necessary because the immediate environment of the chimney prohibited the use of such traditional demolition techniques as blasting

and chiselling, or concrete demolition with shears. The chimney demolition saw guarantees the safe demolition of the chimney with minimum impact on the immediate surroundings. The use of this special saw enabled the 200-metre high chimney to be demolished within 8 weeks, whereas demolition using traditional methods would have taken approximately 6 months.



Redmax Dowel Drive System


The automatic dowel drive system was specially designed and manufactured for the installation of fireproof plates on tunnel walls. This specifically purpose-built machine makes it possible for two to three workers to install the fireproof plates without using a scaffold.





A Revolution in the manufacture of sand-lime bricks

As a member of a consortium collaborating with the Xella Group, Lissmac has made a detailed study of the manufacture of fitting elements.
This resulted in increased productivity of the latest generation of sand-lime brick factories due to changes in molding and material handling.


LISSMAC sawing plant
The greatest savings achieved were in the area of sawing costs, which also reduced the amount of waste produced. Thirty percent less waste resulted in considerably greater yields from the same amount of raw materials used. Optimised running times as well as fully automated palleting in some areas increased the overall productivity by a factor of 2.5 compared to the previous output.



[ Current Topics and Press Releases ]
Deslagging machine SBM-D
The innovative steel brushing and grinding machines made by LISSMAC Maschinenbau und Diamantwerkzeuge GmbH, provide the sheet-metal processing industry with cost-saving equipment for efficient edge processing of cut sheet components. Thick slag deposits can develop during flame- or plasma-cutting of thick plate. Lissmac has now implemented this newly developed process it into an innovative machine that efficiently strips off slag from the cut edges. Naturally, Lissmac remains true to its principle of simultaneous processing of the upper and lower cut edges in a single pass. The new slag removal machine SBM-D removes cutting slag reliably and completely from the sheet-metal component.


[ ATS Stone Cut-Off Saws ]
ATS 120 G/600-2
The ATS 120 G/600-2 (230 volt model) cuts precise and fast mitre cuts.